кешбака

Купить mrf24j40ma irm802154 rf transceiver module 24 ghz ieee std 802154 rf transceiver module 2pcs по низкой цене в интернет - магазине


mrf24j40ma irm802154 rf transceiver module 24 ghz ieee std 802154 rf transceiver module 2pcs

Найти mrf24j40ma irm802154 rf transceiver module 24 ghz ieee std 802154 rf transceiver module 2pcs со скидкой или по акции - недорого


NRF24L01 RF Board (A) Wireless 2.4GHZ Transceiver Evaluation Development Board Module - Black NRF24L01 RF Board (A) Wireless 2.4GHZ Transceiver Evaluation Development Board Module - Black Новинка

NRF24L01 RF Board (A) Wireless 2.4GHZ Transceiver Evaluation Development Board Module - Black

292.2 руб.
Brand waveshare Model NRF24L01 RF Board (A) Quantity 1 Piece Color Black Material CCL+PCB board Chipset NRF24L01 English Manual / Spec Yes Download Link http://www.wvshare.com/downloads/accBoard/NRF24L01-RF-Board.7z Other Features Overview The NRF24L01 RF Board (A) is an accessory board offers wireless 2.4G solution with NRF24L01 onboard. It uses SPI interface for communication. The board is ideal for applications such as wireless data transmission multicast and frequency-hopping communication. The NRF24L01 RF Board (A) integrates only ONE NRF24L01 while at least TWO NRF24L01 are required to establish communication with each other. The NRF24L01 RF Board (A) is designed to use 1.9V3.6V low voltage power supply only. Features NRF24L01 SPI interface Packing List 1 x NRF24L01 RF Board (A)
433MHz SX1278 Long Range RF Wireless Transceiver Module - Blue 433MHz SX1278 Long Range RF Wireless Transceiver Module - Blue Новинка

433MHz SX1278 Long Range RF Wireless Transceiver Module - Blue

536.1 руб.
DRF1278F is a type of 433MHz low cost RF front-end transceiver module based on SX1278. It keeps the advantages of RFIC SX1278 but simplifies the circuit design. The high sensitivity (-136dBm) in LoRa modulation and 20dBm high power output make the module suitable for low range and low data rate applications.
RF1100S 433MHz Wireless Transceiver Module w/ Spring Antenna - Green + Silver (1.8V~3.6V) RF1100S 433MHz Wireless Transceiver Module w/ Spring Antenna - Green + Silver (1.8V~3.6V) Новинка

RF1100S 433MHz Wireless Transceiver Module w/ Spring Antenna - Green + Silver (1.8V~3.6V)

416.83 руб.
Model: RF1100S - Quantity: 1 - Color: Green + silver - Material: PCB - Adopts the latest CC110L wireless radio frequency chip compatible with CC1100 CC1101 - 433MHz wireless transceiver working via 433MHz free ISM frequency band (387~464MHz recommend 430~436MHz) - Supports 2-FSK 4-FSK GFSK and OOK modulation system (do not support MSK) - Programmable data rate: 0.6~600Kbps (recommend 2.4Kbps~500Kbps) - Lower voltage 1.8~3.6V power supply recommend 3.3V - Sleep current: <2.5uA - Maximum transmitting power: +10dBm; Maximum transmitting current: <30mA; Receiving current: 12.5mA - Receiving sensitivity: -110dB 2.4kbps - Quick start time: 240uS (from sleep mode to receiving mode (RX) or transmitting mode (TX)) - Quick switch: <1ms (between receiving mode (RX) and transmitting mode (TX)) - The module supports setting site it outputs data as receiving the setting site; Supports connecting singlechip to use convenient for software programming - SPI interface - High-accuracy crystal and wire winding coil external shielding cover steady-state strong anti-interference - Single pin header the space between the pins is 2mm - With silver plating spring antenna outdoor straight line communication distance up to 200 meters - Packing List: - 1 x RF 1100S wireless transceiver module Manual: http://m5.img.dxcdn.com/CDDriver/CD/sku.206482.docx
RFC-1100C Wireless RF Transceiver Module w/ Pin Header / Antenna - Blue RFC-1100C Wireless RF Transceiver Module w/ Pin Header / Antenna - Blue Новинка

RFC-1100C Wireless RF Transceiver Module w/ Pin Header / Antenna - Blue

766.28 руб.
Model RFC-1100C Quantity 1 Color Blue Material PCB Features Use CC110L wireless RF chip fully compatible with CC1100/CC1101 more simple and stable; Programmable data speed: 0.6~600kbps (recommend range: 2.4kbps~500kbps); Working frequency range: 387~464MHz free ISM frequency band (recommend range: 430~436MHz); Modulation mode: 2-FSK 4-FSK GFSK and OOK; 64 bit receive and transmit; Can set address by software output data when receive the module's address; Can directly connects kinds of SCM for use; Convenient software programming; Low power consumption performance current consumption about 20uA when on sleep mode; Max transmit power: +20dBm; Quick start: 240uS; Fast switch. Specification Working temperature: 4.5~5.5V Max. transmitted power: +20dBm Max. data transmission: 500kbps output power: +20dBm working temperature: -40'C~85'C classical sensitivity / highest sensitivity: -110/-116dBm power down mode working current: 20uA: 65mA receive mode working current: 12.5mA. Application Great for DIY projects. English Manual/Spec Yes Packing List 1 x Wireless RF transceiver module 1 x High gain antenna Manual: http://m5.img.dxcdn.com/CDDriver/CD/sku.208524.docx
Arduino Si4432 433MHz Wireless RF Transceiver Module Arduino Si4432 433MHz Wireless RF Transceiver Module Новинка

Arduino Si4432 433MHz Wireless RF Transceiver Module

264.21 руб.
Arduino Si4432 433MHz Wireless RF Transceiver Module Low Power Consumption With Antenna Compatible With RPi
2.4GHz Wireless Transceiver NRF24L01 Adapter Module 2.4GHz Wireless Transceiver NRF24L01 Adapter Module Новинка

2.4GHz Wireless Transceiver NRF24L01 Adapter Module

172.86 руб.
2.4GHz Wireless Transceiver NRF24L01 Adapter Module 3.3V / 5V Compatible With Arduino
NRF24L01 RF Board (C) Wireless Module 2.4G Radio Transceiver Evaluation Development Board - Black NRF24L01 RF Board (C) Wireless Module 2.4G Radio Transceiver Evaluation Development Board - Black Новинка

NRF24L01 RF Board (C) Wireless Module 2.4G Radio Transceiver Evaluation Development Board - Black

759.72 руб.
Brand waveshare Model NRF24L01 RF Board (C) Quantity 1 Piece Color Black Material CCL+PCB board Chipset NRF24L01 English Manual / Spec Yes Download Link http://www.wvshare.com/downloads/accBoard/NRF24L01-RF-Board-C.7z Other Features Wireless 2.4G solution for SPI interface features PA+LNA supports external antenna vertical pinheaders Overview The NRF24L01 RF Board (C) is an accessory board offers wireless 2.4G solution with NRF24L01 onboard. It uses SPI interface for communication. The board is ideal for applications such as wireless data transmission multicast and frequency-hopping communication. The NRF24L01 RF Board (C) integrates only ONE NRF24L01 while at least TWO NRF24L01 are required to establish communication with each other. The NRF24L01 RF Board (C) is designed to use 3V3.6V power supply only. External antenna is NOT included in the price you should buy one separately for long-distance communication. Recommended antenna: RP-SMA 2.4G 2DB Antenna Features NRF24L01 SPI interface Packing List 1 x NRF24L01 RF Board (C)
NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Raspberry Pi NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Raspberry Pi Новинка

NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Raspberry Pi

120.83 руб.
NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Raspberry Pi
Low Power sx1212 Embedded Data Radio Modem RF Transceiver Module - Orange + Gold Low Power sx1212 Embedded Data Radio Modem RF Transceiver Module - Orange + Gold Новинка

Low Power sx1212 Embedded Data Radio Modem RF Transceiver Module - Orange + Gold

842.01 руб.
DRF1212D10 is a low-cost sub-1 GHz transceiver module designed for operations in the unlicensed ISM (Industrial Scientific Medical) and LPRD bands. FSK (Frequency Shift Keying) modulation/demodulation multi-channel operation high bandwidth efficiency and anti-blocking performance make DRF1212D10 modules easy to realize the robust and reliable wireless link. The module can be configured to work in different channels with 200 KHz space. It adopts high efficient looped interleaving EDAC (Error Detection and correction) coding with coding gain up to 3dB which keeps in advance in error correction and coding efficiency over normal FEC (Forward Error Correction) coding. Because of its high reliability in correction modules can filter error and fake information automatically and realize truly transparent wireless link which makes DRF1212D10 very suitable in the rigid communication environment. DRF1212D10 integrates two 256 bytes buffer. When the buffer is empty users can transfer nearly 217 bytes data per time and even limitless data transfer can be achieved as long as RF data rate (RF module to RF module) is configured to be faster than UART data rate (MCU to RF module). DRF1212D10 provides standard UART/TTL interface. Users can choose seven data rates and three parity checks which make DRF1212D10 possibly tailor-made for different applications. DRF1212D10 operates at 2.1~3.6V with extra low power consumption. The current in sleep mode can be minimized to 1.5uA and the current in receive mode no more than 4mA makes modules very suitable for battery powered-up applications. The part number in the picture is DRF1212D10-043A which is DIP package. For SMD package please check the DRF1212D10-043S1.
UTC-1212SE Wireless SX1212 RF Transceiver Module w/ Antenna (2.1~3.6V) UTC-1212SE Wireless SX1212 RF Transceiver Module w/ Antenna (2.1~3.6V) Новинка

UTC-1212SE Wireless SX1212 RF Transceiver Module w/ Antenna (2.1~3.6V)

953.52 руб.
Model: UTC-1212SE - Color: Green - Material: PCB - Integrated SX1212 chipset - Low Rx power consumption: 3mA - Low Tx power consumption: 25 mA @ +10 dBm - Programmable RF output power: up to +12.5 dBm in 8 steps - Packet handling feature with data whitening and automatic CRC generation - RSSI (Received Signal Strength Indicator) - Incoming sync word recognition - Communication range: 300~500 meters - Standard 2.54mm pin pitch - Built-in Bit-Synchronizer for incoming data and clock synchronization and recovery - Working voltage: 2.1~3.6V - Working temperature: -40~85'C - Working humidity: 10~90% - Frequency: 390~470MHz - Transmit power: -8.5~12.5dBm - Transmission rate: 1K 2K 5K 10K 25K 40Kbps - Tx current: 34mA - Continuous Rx current: 3mA - Sleep current: 1.5uA - Max. sensitivity: -110dBm - Serial transmission rate: 1200/2400/4800/9600/19200/38400/57600bps - Max. data packet: 152byte - Configuration modification: 300k cycles - Comes with 10cm antenna
RF1100SE Transceiver Programming Module w/ Antenna - Green RF1100SE Transceiver Programming Module w/ Antenna - Green Новинка

RF1100SE Transceiver Programming Module w/ Antenna - Green

560.55 руб.
Model: RF1100SE - Quantity: 1 - Color: Green - Material: PCB board - Working voltage: 1.8V~3.6V (Recommend 3.3V) - 433MHz band certification-free usage - Max. Working efficiency 500Kbps which support 2-FSK GFSK and MSK modulation - Modify baud rate with software better requirement for customers in different conditions of use - High baud rate faster data transfer rate - Low baud rate more strong anti-jamming and penetration ability the transmission distance further - High sensitivity (1.2 Kbps down-110 dBm 1% packet ber) - Built-in hardware CRC (inspection wrong and point-to-multipoint address control) - Lower consumption (RX 15.6 mA 2.4 Kbps which 433 MHz) - Can be programmed to control the output power for all the support frequency can reach +10 dBm - Waken wireless support low power electromagnetic wave activated and wake on lower consumption device - Before transmission channel access will be cleaned up automatically (CCA) named carrier protected reliably against detective system - Fast frequency changes brought the right frequency synthesizer jumping system - Module can be set address software software programming is very convenient - The standard DIP spacing interface easy to embedded applications - Separate 64 bytes RX and TX data FIFO - Open the actual transmission distances of up to 200 meters above (depending on the specific environment and - Great for DIY project
433MHz Wireless RF Transceiver Module w/ Spring Antenna 433MHz Wireless RF Transceiver Module w/ Spring Antenna Новинка

433MHz Wireless RF Transceiver Module w/ Spring Antenna

444.86 руб.
Color: Green - Material: PCB - Operating voltage: 1.8V~3.6V (recommended 3.3V) - Maximum transmission rate: 500Kbps - Support for 2-FSK GFSK and MSK modulation - Rate power and frequency can be modified with software - High sensitivity (1.2Kbps under-110dBm 1% packet error rate) - Built-in hardware CRC error detection and address control - Programmable control of output power up to +10dBm - Wireless wake-up functionality to support low-power electromagnetic activation wireless wake-up low-power sleep state of the equipment - Support the transmission channel before the auto-clean-up visits (CCA) the Carrier Sense System - Fast frequency changes brought about by a suitable synthesizer frequency hopping system - Module can be software-based address software programming is very convenient - 2.54mm DIP spacing interfaces for embedded applications - Separate 64-byte RX and TX data FIFO - Transmission Distance: Open to the actual transmission distance up to 200m (depending on the specific situation of the environment and communication baud rate settings)
NRF2401B 2.4GHz Wireless RF Transceiver Module NRF2401B 2.4GHz Wireless RF Transceiver Module Новинка

NRF2401B 2.4GHz Wireless RF Transceiver Module

545.64 руб.
Color: Green - Material: PCB - With RF2401B wireless communication module - 2.4GHz ISM frequency range - Up to 1Mbps working speed - 125 channels - High anti-jamming GFSK modulation - 8 / 16-bit CRC cyclic redundancy check and point to multi-point mailing address control - Achieves wireless network communication with TDMA / CDMA / FDMA theory - Voltage: 1.9~3.6V standby power consumption: 1uA - Allows to set address - Receive and transmit indicator supports up to 28-bit - Built-in voltage-stabilized power supply - Standard DIP pitch - CLK / DATA / DR interface for easy programming - Dual receiving channels built-in antenna up to 20 meters communication range
NRF24L01 2.4GHz Wireless Transceiver Module - Black NRF24L01 2.4GHz Wireless Transceiver Module - Black Новинка

NRF24L01 2.4GHz Wireless Transceiver Module - Black

132.38 руб.
Quantity: 1 - Color: Black - Material: Circuit board - NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz - Wireless transceiver including: Frequency generator enhanced type SchockBurstTM mode controller power amplifier crystal amplifier modulator demodulator - The output power channel selection and protocol settings can be set extremely low current consumption through the SPI interface - As the transmit mode the transmit power is 6dBm the current is 9.0mA the accepted mode current is 12.3mA the current consumption of the power-down mode and standby mode are lower - Built-in 2.4GHz antenna supports up to six channels of data reception - Size: 15 x 29mm (including antenna) - Low operating voltage: 1.9-3.6V - 125 channels multi-point communication and frequency hopping to meet the communication needs - High Rate: 2Mbps as air transmission time is very short greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps) - Low power consumption: When the answer mode communication fast air transmission and start-up time which greatly reduces the current consumption - Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol such as: automatic retransmission of lost packets and automatically generate response signals etc. - NRF24L01 SPI interface: hardware SPI port MCU I/O ports - Internal FIFO compatible with a variety of microprocessor interface micro-controller is convenient - Standard pin Dip2.54MM spacing interface for embedded applications - Packing list: - 1 x NRF24L01 wireless transceiver module
RF4432SE Si4432 433MHz Wireless RF Transceiver Module RF4432SE Si4432 433MHz Wireless RF Transceiver Module Новинка

RF4432SE Si4432 433MHz Wireless RF Transceiver Module

647.61 руб.
Model: RF4432SE - Color: Blue - Material: PCB - Si4432 chipset - FSK modulation - 433 ISM frequency range (430.24~439.75MHz) works on 900.72~929.27MHz - Transmit power: 17dBm (max.) - Receiving sensitivity: -115dBm - Transmit speed: 128Kbps - FSK frequency offset programming: 15~240KHz - Receiving bandwidth programming: 67~400KHz - SPI control interface - Receiving current: 18.5mA - Transmitting current: 73mA - Working range: 600 meters (bit rate 4.8kbps / 9.6kbps)
DRF4432F20 433MHz RF Wireless Transceiver Module DRF4432F20 433MHz RF Wireless Transceiver Module Новинка

DRF4432F20 433MHz RF Wireless Transceiver Module

288.02 руб.
DRF4432F20 is a type of low cost RF front-end transceiver module based on SI4432 from Silicon labs. It keeps all the advantages of RFIC SI4432 but simplifies the circuit design. The high sensitivity (-121dBm) and 20dBm high power output make the module suitable for most short range applications. DRF4432F20 module consists of RFIC Si4432 thin SMD crystal and antenna matching circuit. The antenna port is well matched to standard 50 Ohm impedance. Users don't need to spend time in RF circuit design and choose suitable antennas for different applications. DRF4432D20 operates at 1.8~3.6V with extra low standby current which makes it suitable for battery powered-up applications. It also can communicate with low power module DRF4431F13 and high power module DRF4432F27 with 500mW output power which provides users high flexible in designing products for different distances.
433MHz 500mW High Power Transceiver Module w/ RS232/TTL Interface - Orange 433MHz 500mW High Power Transceiver Module w/ RS232/TTL Interface - Orange Новинка

433MHz 500mW High Power Transceiver Module w/ RS232/TTL Interface - Orange

1847.41 руб.
DRF7020D27 is a type of 433MHz high power wireless transceiver module based on RFIC ADF7020-1. It adopts high efficient EDAC technology to guarantee the reliability of communication. The modules can work well at the default parameters without any change. Users also can change the parameters such as RF data rate output power RF center frequency Baud rate according to the applications through commands by microcontroller or USB-to-TTL converter board DAC02 by computer. Because of the superb stability the line-of-sight distance at 9.6k bps RF data rate can be 2.8~3.5km. If users use lower RF data rate and higher gain antenna such as Yagi antenna the distance can be extended to 6km or even more. The part number in the picture is DRF7020D27-043A1 which integrates UART/TTL interface and RS232 interface so it provides designer more flexibility for different applications. It can communicate with lower power module DRF7020D13. For tight budget application DRF7020D27-043A1 can be used as transmitter and DRF7020D13 as receiver for one way communication.
433MHz 500mW Wireless Transceiver Module w/ RS485/TTL Interface - Orange 433MHz 500mW Wireless Transceiver Module w/ RS485/TTL Interface - Orange Новинка

433MHz 500mW Wireless Transceiver Module w/ RS485/TTL Interface - Orange

1847.41 руб.
DRF7020D27 is a type of 433MHz high power wireless transceiver module based on RFIC ADF7020-1. It adopts high efficient EDAC technology to guarantee the reliability of communication. The modules can work well at the default parameters without any change. Users also can change the parameters such as RF data rate output power RF center frequency Baud rate according to the applications through commands by microcontroller or USB-to-TTL converter board DAC02 by computer. Because of the superb stability the line-of-sight distance at 9.6k bps RF data rate can be 2.8~3.5km. If users use lower RF data rate and higher gain antenna such as Yagi antenna the distance can be extended to 6km or even more. The part number in the picture is DRF7020D27-043A2 which integrates UART/TTL interface and RS485 interface so it provides designer more flexibility for different applications. It can communicate with lower power module DRF7020D13. For tight budget application DRF7020D27-043A2 can be used as transmitter and DRF7020D13 as receiver for one way communication.
DRF4431F13 433MHz 13dBm RF Wireless Transceiver Module DRF4431F13 433MHz 13dBm RF Wireless Transceiver Module Новинка

DRF4431F13 433MHz 13dBm RF Wireless Transceiver Module

288.02 руб.
DRF4431F13 is a type of low cost RF front-end transceiver module based on SI4431 from Silicon labs. It keeps all the advantages of RFIC SI4431 but simplifies the circuit design. The high sensitivity (-121dBm) and 13dBm high power output make the module suitable for most short range applications. The module consists of RFIC Si4431 thin SMD crystal and antenna matching circuit. The antenna port is well matched to standard 50 Ohm impedance. Users don't need to spend time in RF circuit design and choose suitable antennas for different applications. It operates at 1.8~3.6V with extra low standby current which makes it suitable for battery powered-up applications. DORJI also provides compatible in communication modules DRF4432F20 with 100mw output power and DRF4432F27 with 500mW output power which provides users high flexible in designing products for different distances.
RFC-1100H CC1101 433MHz Wireless RF Transceiver Module RFC-1100H CC1101 433MHz Wireless RF Transceiver Module Новинка

RFC-1100H CC1101 433MHz Wireless RF Transceiver Module

1896.31 руб.
Model: RFC-1100H - Color: Green - Material: PCB - On board CC1101 chipset - Maximum rate of 500kbps supports GFSK modulation - High sensitivity up to -110dBm - Max. transmit power: 2W (+33dBm) - Working range: 2000~3000 meters - Working voltage: 5V / 3.3V - Mode switch time: - TX mode instantaneous working current: - RX mode instantaneous working current: 12.5mA - Standard DIP pitch - Perfect for DIY project
NRF24L01 Wireless Transceiver Module SMA Antenna MCU Arduino NRF24L01 Wireless Transceiver Module SMA Antenna MCU Arduino Новинка

NRF24L01 Wireless Transceiver Module SMA Antenna MCU Arduino

4.3 руб.
Arduino 2.4G NRF24L01+ Wireless Transceiver Module + SMA Antenna Microcontroll is available now from our US warehouse Free shipping to US in 3-6 business days ship to Canada, Brazil in 7-10 days NRF24L01 + 2.4G Wireless Transceiver Module + SMA Antenna MCU Arduino Description: NRF24L01 Basic characteristics: 2 Mbit / s rate of the peak current of 12.5mA received In the 2Mbit / s rate @ 0dBm output peak current of 11mA 400nA power down mode 32uA standby mode power consumption 130us fast switching and wake-up time With on-chip voltage regulator oltage regulators In the 1.9 to 3.6V low voltage operation MultiCeiverMT hardware provides simultaneous six receiver functions, 2Mbit / s high-quality VoIP makes it possible to 130 us quickly switch and wake time Has the on-chip voltage regulator oltage regulators Can work at 1.9 to 3.6 V low voltage Application: Mouse, keyboard, wireless headsets, smart sports equipment, remote controls, voice applications, safety devices, VOIP applications, remote control, telemetry, wireless meter reading, access control, systems, paging, industrial data acquisition systems, wireless tag. Identification, RF contactless smart cards, small wireless data terminals, fire safety systems, wireless remote control system. Systems, bio-signal acquisition, wireless 232, wireless 422/485 data communications. Package included: 1 x NRF24L01 + Wireless transceiver module

кешбака
Страницы:


DRF1212D10 is a low-cost sub-1 GHz transceiver module designed for operations in the unlicensed ISM (Industrial Scientific Medical) and LPRD bands. FSK (Frequency Shift Keying) modulation/demodulation multi-channel operation high bandwidth efficiency and anti-blocking performance make DRF1212D10 modules easy to realize the robust and reliable wireless link. The module can be configured to work in different channels with 200 KHz space. It adopts high efficient looped interleaving EDAC (Error Detection and correction) coding with coding gain up to 3dB which keeps in advance in error correction and coding efficiency over normal FEC (Forward Error Correction) coding. Because of its high reliability in correction modules can filter error and fake information automatically and realize truly transparent wireless link which makes DRF1212D10 very suitable in the rigid communication environment. DRF1212D10 integrates two 256 bytes buffer. When the buffer is empty users can transfer nearly 217 bytes data per time and even limitless data transfer can be achieved as long as RF data rate (RF module to RF module) is configured to be faster than UART data rate (MCU to RF module). DRF1212D10 provides standard UART/TTL interface. Users can choose seven data rates and three parity checks which make DRF1212D10 possibly tailor-made for different applications. DRF1212D10 operates at 2.1~3.6V with extra low power consumption. The current in sleep mode can be minimized to 1.5uA and the current in receive mode no more than 4mA makes modules very suitable for battery powered-up applications. The part number in the picture is DRF1212D10-043A which is DIP package. For SMD package please check the DRF1212D10-043S1.